One of the most common things first-time buyers say after fitting their Tow Pro for the first time is some version of: “That was easier than I expected.”

It should be. A towing cover that takes twenty minutes to fit isn’t a practical solution — it’s a reason not to bother. Our Tow Pro range is designed to go on quickly, stay secure at speed, and come off just as easily when you arrive on site. No tools. No alterations. Nothing beyond what comes in the bag.

Here’s exactly how it works.

Removing the Cover

Removal is the fitting process in reverse — and just as straightforward.

Step 1 — Unfasten the A-frame strap, unclip all the Quick Fit Clips from under the valance, undo the Velcro tension straps, and undo the full height zip on the offside to release the awning tape from that channel.

Step 2 — Walk around to the nearside and slide the awning tape fully out of the channel. The cover is now free of the caravan. Zip the offside section back up once the tape is removed.

Step 3 — Hold the cover out straight or lay it across a flat surface to fold. Fold it so the soft inner lining faces inward — this protects the backing and keeps it clean. Keep the cover off the ground during folding to prevent dirt contact with the inner lining.

Step 4 — Place the folded cover into the storage bag, ready for your next trip. If the cover is damp when you remove it, lay it out to dry before packing it away wherever possible.

A Note for European Caravan Owners

The standard fitting method described above requires two open awning channels. Some European caravan models only feature one open awning channel — if this applies to your van, your cover will be fitted using a slightly different method involving 3M adhesive poppers on the channel-free side. Get in touch with our team and we’ll advise on the right approach for your specific caravan.